10
Figure 5
Assigning unique AIDs and LIDs can be quite helpful in the
organization and monitoring of test results. Trends may be
tracked and potential remediations applied as needed. Site maps
can be sketched onto graph paper by hand or easy-to-use CAD
drawing programs such as Smart Draw™ can be used to create
impressive reports.
TEST LOCATION PHOTOGRAPHS
Photographic evidence of test location presence can be
provided within each saved test result file.
By default, a forward-facing photograph is taken in each 90
degree orientation when using a programmed test method.
Single run tests will have only one photo documented.
The camera may be disabled in the Device Settings menu.
To Next Page
Loading...