EasyManua.ls Logo

Regency HEAT WAVE 946-556 User Manual

Regency HEAT WAVE 946-556
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
918-023q
06.17.20
Manufactured by:
FPI Fireplace Products International Ltd.
6988 Venture St.,
Delta, B.C. Canada, V4G 1H4
Tested by: Intertek
FOR YOUR SAFETY
What to do if you smell gas:
* Do not try to light any appliance
* Do not touch any electrical switch: do not
use any phone in your building.
* Immediately call your gas supplier from a
neighbour's phone. Follow the gas supplier's
instructions.
* If you cannot reach your gas supplier, call
the re department.
WARNING:
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage. Refer
to this manual. For assistance or additional information
consult an authorized installer, service agency or the gas
supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other ammable vapours
and liquids in the vicinity of this or any other appliance.
Installation and service must be performed by an author-
ized installer, service agency or the gas supplier.
HEAT WAVE DUCT KIT
KIT # 946-556 & 946-753
PLEASE KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Approved for use with the following Gas Fireplace Models:
www.regency-re.com
City 40 Series, City 60 Series, City 72 Series, HZ33CE, HZ54E, HZ40E, P33, P33CE, P33E,
P36, P36E, P36D, P90, U900E, U1500E, G800EC and G800C
C#4001172
Question and Answer IconNeed help?

Do you have a question about the Regency HEAT WAVE 946-556 and is the answer not in the manual?

Regency HEAT WAVE 946-556 Specifications

General IconGeneral
CategoryFireplace Accessories
MaterialMetal
CompatibilityRegency Fireplaces
Model946-556
FunctionDistributes heat more evenly

Summary

Listings and Code Approvals

General Information

Explains the purpose of the Heat Wave Air Duct Kit and installation notes.

Important Installation Notes

Details essential installation requirements and code compliance.

Parts

Minimum Framing Clearances

Minimum Duct Clearances

Specifies clearance rules for air ducts relative to combustible materials.

Installation - Side Exit Models

Installation - P90 (Top Exit)

Installation - City 40 Series (Top Exit)

Installation - City 72 Series

Installation - City 60 Series

Installation - Fan Housing and Duct Run

Installation - Rheostat and Register

Wiring Diagram

Operation

Maintenance