Issue 11 / 2016
Art. No.: SM00002EN 3/14 Service Manual Server ENG
3 Maintenance
• Ensure that every part of the rollator is secure at ALL times.
• Check all screws for tightness. Tighten if necessary.
• Replace any broken, damaged or worn items immediately.
4 Refurbishment
The walker is suitable for re-use. Before passing on to another user it must be subject to an inspection by the
specialist dealer.
The following points have to be checked:
• Visual inspection of the frame
• Secure seating of nuts and bolts
• Condition of the plastic elements
• Condition of wheels and ball bearings
• Effectiveness and condition of the brakes
When a part is damaged or broken it must be replaced. It is recommended to replace the wheels whenever a
change. All loose bolts and nuts must be tightened.
The product must be thoroughly cleaned and disinfected prior to reuse.
It is recommended to remove the seat and the shopping bag before cleaning and to replace with new.
WARNING! It is forbidden to re-use the rollator when the frame is bent or broken.
The instruction manual must accompany the rollator with every change.
5 How to deposit the product
The device should not be deposited with normal garbage. It should be delivered to the deposit station for re-
use or recycling.
6 Warranty
The manufacturer offers a 2 year guarantee for errors in production and 5 years guarantee on the aluminium
frame. The guarantee is not valid by misuse of the product.
To Next Page
Loading...