1 INFORMATION AND SAFETY
INSTRUCTIONS
1.1 On this documentation
- Please read these instructions carefully before
installing or operating the RE.GUARD water
control device.
- Keep the instructions safe and on hand at the
installation site.
- Pass these instructions on to subsequent users.
Scope
These installation instructions are valid for
Germany.
Pictograms and logos
The following pictograms and logos are used in
these instructions:
Safety notice
Legal notice
Important information
Validity of the instructions
To ensure your own safety and the correct use
of our products, please check at regular intervals
whether a newer version of these instructions is
available. The issue date of these instructions is
printed on the bottom right-hand side of the back
page.
You can view and download the most recent
instructions as well as further instructions at
www.rehau.com/ti.
1.2 Intended use
The RE.GUARD water control device may only
be installed and operated as described in these
instructions. Compliance with these instructions
is part of intended use.
Installation and maintenance may only be
carried out by qualified and trained personnel.
This means personnel who, through training
and experience, are permitted and capable
of carrying out the relevant installation work,
identifying and avoiding potential hazards as
well as observing relevant applicable regulations
(e.g. regulations regarding work safety, electrical
safety etc.)
6
To Next Page
Loading...
Need help?
General