To Next PageTo Next Page
Need help?Do you have a question about the REHFUSS SR Series and is the answer not in the manual?
General| Brand | REHFUSS |
|---|---|
| Model | SR Series |
| Category | Industrial Equipment |
| Language | English |
Provides critical safety guidelines for the standard operation and handling of gearboxes.
Defines the intended industrial applications and compliance standards for the gearboxes.
Instructions for safe handling of shipments and inspection for transport damage.
Details the construction and components of the SR120-SR160 1-step helical gearbox.
Illustrates the construction of the SR210-SR260 2-step helical gearbox.
Shows the design and parts of the SR320-SR360 3-step helical gearbox.
Presents the construction details for SR270-SR370 helical gearboxes.
Explains the construction of Type FG shaft mounted gearboxes.
Details the construction of S030-S050 worm gearboxes with solid shaft.
Illustrates the construction of S030-S050 worm gearboxes with hollow shaft.
Shows the construction of SS130-SS150 helical worm gearboxes with solid shaft.
Details the construction of SS130-SS150 helical worm gearboxes with hollow shaft.
Presents the construction of SS160-SS170 helical worm gearboxes with solid shaft.
Illustrates the construction of SS160-SS170 helical worm gearboxes with hollow shaft.
Explains the construction of SM011-SM031 worm gearboxes.
Details the construction of SM041 worm gearboxes.
Shows the construction of SM051-SM061 worm gearboxes with solid shaft.
Illustrates the construction of SM051-SM061 worm gearboxes with hollow shaft.
Details the construction of SSM121-SSM131 worm gearboxes.
Explains the construction of SSM151-SSM161 worm gearboxes.
Describes the construction and function of the basic slip clutch.
Details the construction and components of the basic IEC adapter.
Explains the construction and purpose of the basic free input shaft.
Lists the essential tools needed for the mechanical installation of gearboxes.
Outlines the critical checks and conditions that must be met prior to installation.
Describes the necessary preparation steps for components before installation.
Provides detailed instructions for correctly mounting the gearbox onto a support structure.
Instructions for mounting input and output components onto gearboxes with solid shafts.
Procedure for correctly mounting the torque arm for stability.
Steps for the mounting and dismantling of gearboxes featuring hollow shafts.
Process for mounting and dismounting gears using shrink discs and cowls.
Detailed steps for the correct mounting of an IEC adapter.
Instructions for mounting an IEC adapter when an adapter flange is used.
Specific procedure for mounting an IEC adapter onto the SM041 gearbox.
Guidance on how to mount applications onto a free input shaft.
Procedure for checking and controlling lubricant levels using an oil level screw.
Method for controlling lubricant on gearboxes that do not have an oil level screw.
Information on the required warmup time and initial operation of worm gearboxes.
Guidelines for the initial startup of helical and shaft mounted gearboxes.
General procedures and considerations for starting gearboxes and geared motors.
Defines the recommended schedules for routine inspection and maintenance tasks.
Specifies the intervals for lubricant replacement based on operating conditions and temperature.
Provides guidelines for replacing rolling bearings based on their performance and operating hours.
Troubleshooting guide for common gearbox problems, including possible causes and solutions.
Identifies common issues encountered with IEC adapters and provides corresponding remedies.
Troubleshooting guide for problems specifically related to the free input shaft.
An overview of the various mounting configurations available for the gearboxes.
Illustrates the different mounting positions for the SR 1-step gearbox series.
Depicts the various mounting positions applicable to SR 2-step gearboxes.
Shows the available mounting positions for the FG series of gearboxes.
Illustrates the different mounting positions for the S series worm gearboxes.
Details the various mounting positions for the SS series helical worm gearboxes.
Presents the specific mounting positions for the SM and SSM series gearboxes.
