Need help?Do you have a question about the REI HD5-600 and is the answer not in the manual?
General| Operating System | Embedded Linux |
|---|---|
| Video Output | HDMI, VGA |
| Power Supply | DC 12V |
| Compression | H.264 |
| Motion Detection | Yes |
| Recording Resolution | 1080p |
| Audio Input/Output | 1 input, 1 output |
| Network Interface | RJ45 |
| Remote Viewing | Yes |
| Operating Temperature | -10°C to 55°C |
Ensures all installation and operation comply with local electrical safety norms.
Avoid stress, vibration, impact, and water during transport, storage, and installation.
Handle carefully and install according to requirements, avoiding pressure before completion.
Maintenance by qualified personnel only; no liability for unauthorized modifications.
Install and store in a cool, dry place, away from sunlight, with adequate ventilation.
Use manufacturer-recommended accessories and ensure proper insulation.
Introduces the HD5-600 as a vehicle video surveillance and remote monitoring Digital Video Recorder.
Details system, video, audio, display, and recording specifications for the HD5-600.
Illustrates and lists components and connections on the front panel of the HD5-600.
Illustrates and lists components and connections on the rear panel of the HD5-600.
Troubleshooting steps for the system failing to start.
Steps to diagnose and resolve frequent, unexpected restarts of the MDVR device.
Guidance on troubleshooting recording failures, checking storage and camera inputs.
Steps to check for audio issues, including microphone presence and audio settings.
Steps to troubleshoot GPS signal reception issues, checking antenna and environmental factors.
Troubleshooting steps for the device not shutting down correctly in ignition switch mode.
Instructions on how to properly install the WIFI antenna on an unobstructed roof location.
Troubleshooting for shutdown issues in ignition ON/OFF mode, checking ACC signal.
Troubleshooting GPS anomalies, checking antenna installation, connectors, and environmental interference.
Steps to ensure audio is captured and enabled for video files, checking microphone and settings.
Checking storage installation, contact, formatting, and video input for recording failures.
Diagnosing persistent restarts due to insufficient voltage or storage device issues.
Checking power input, ACC signal voltage, and hard disk status for startup failures.
Provides the default login username and password for new devices.
Explains the reason for the 8V low voltage protection setting for device shutdown.
To Next Page