Need help?Do you have a question about the REICH U4 and is the answer not in the manual?
General| Brand | REICH |
|---|---|
| Model | U4 |
| Category | Battery Charger |
| Language | English |
Explains how to select charging modes and details LED indicators for various states and errors.
Details Mode 1 for charging small batteries (<14Ah), including connection and LED indicators.
Details Mode 2 for charging batteries with larger capacity (>14Ah), including connection and indicators.
Details Mode 3 for cold conditions or AGM batteries (>14Ah), including connection and indicators.
Explains the pulse charging feature to improve charge acceptance of deeply discharged batteries.
Describes protections against short circuit, low voltage, open circuit, and reverse polarity connections.
Explains how the charger reduces output power automatically if it overheats.
Covers device specifications, battery compatibility, terminal cleaning, and ventilation requirements.
Details battery disconnection, clamp connection, power connection, mode selection, and charge status indicators.
Specifies usage for 12V lead-acid batteries only, warns against other uses and non-rechargeable batteries.
States the charger is for indoor use only and outlines conditions for use by children and persons with reduced capabilities.
Covers prohibitions on children playing, operating damaged cords, or using with fractured casing.
Emphasizes proper ventilation, not covering the charger, and locating it away from the battery.
Advises removing metal items, not opening the charger, and ensuring battery in ventilated area during charging.
Details safe connection/disconnection procedures, avoiding short-circuits, and handling battery acid.
Warns about explosive gases from batteries and corrosive battery acid, advising immediate rinsing and medical attention.
Covers disconnecting the charger, ensuring maintenance mode, and environmentally friendly disposal of equipment and packaging.
To Next Page
