EasyManua.ls Logo

Reichert Technologies PT100 - User Manual

Reichert Technologies PT100
40 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
PT100
Portable Non-Contact Tonometer
User’s Guide

Table of Contents

Questions and Answers

  • R
    Ryan ShepherdAug 1, 2025
    Why won't my Reichert Technologies Medical Equipment printer print?
    • L
      Laura StarkAug 1, 2025
      There are several reasons why your printer might not be printing. It could be that the printer is not turned on or is in sleep mode. Another possibility is that the communication menu is set to IR COM; if so, change it in Setup mode. Also, check if the printer is out of paper and replace it if necessary. The PT100 battery might be too low, so recharge it. Finally, the printer batteries could be dead, so replace them.
  • D
    Daniel NicholsonAug 5, 2025
    What to do if my Reichert Technologies Medical Equipment battery will not charge?
    • J
      jamesnormanAug 5, 2025
      If the battery is not charging, first check the connection to ensure it is properly plugged in. If the connection is good, the battery may be damaged and need replacement.
  • J
    Joshua StanleyAug 9, 2025
    What to do if my Reichert Technologies Medical Equipment does not take a reading?
    • K
      Kathryn JonesAug 9, 2025
      If the device isn't taking readings, try the measurement again to ensure correct alignment. Also, make sure the instrument is positioned away from bright lights. A dirty nosepiece could also be the cause; in that case, refer to the maintenance section.
  • R
    Rebecca PetersonAug 14, 2025
    How to fix a blank screen on Reichert Technologies Medical Equipment?
    • L
      Linda HubbardAug 14, 2025
      If the screen is blank, it might be because the instrument switch is in the Off position or in sleep mode. Try pushing any button to wake it up.
  • D
    Daniel AdamsAug 18, 2025
    What does it mean if the amber LED is flashing rapidly on my Reichert Technologies Medical Equipment?
    • W
      William CobbAug 18, 2025
      A rapidly flashing amber LED indicates a short in the battery or charging base. Unplug the device immediately.
  • R
    Robert GlassAug 22, 2025
    Why are the LEDs off on my Reichert Technologies Medical Equipment charging base?
    • J
      John BensonAug 22, 2025
      If the LEDs on the charging base are off, check the fuses and power input.
  • D
    Dr. Jonathon Stewart PhDAug 27, 2025
    How to correct the date/time on Reichert Technologies Medical Equipment printouts?
    • H
      Hector PowellAug 27, 2025
      To correct the date/time on printouts, enter Setup mode to set the date and time.

Summary

Warnings & Cautions

General Safety Warnings

Provides critical warnings regarding instrument use, modifications, and electrical safety to prevent injury or death.

Warnings & Cautions (Continued)

Continued Warnings & Cautions

Details further safety instructions, including handling of batteries, flammables, and proper usage by trained personnel.

Additional Safety Cautions

Highlights cautions related to electrostatic discharge, display cleaning, and electromagnetic compatibility.

System Components

System Components (Continued)

Installation, Features, and Functions

PT100 Setup and Charging

Installation, Features, and Functions (Contd)

Instrument Controls and Modes

Control Panel Functions and Icons

Slit Lamp Mount and Power Disconnection

Setup Mode

Navigating the Setup Menu

Tonometer Menu Settings

Setup Mode (Continued)

Contrast and Illumination Settings

Communication and Date Settings

Time Settings

Language Selection

Measurement Mode

Alignment System Indicators

Explains visual indicators for aligning the PT100 with the patient's eye for accurate measurement.

Measurement Mode (Continued)

Taking an IOP Measurement

Guides users on positioning the PT100 and using alignment cues to perform an IOP measurement.

Achieving Applanation and Measurement Results

Describes achieving applanation, hearing the air puff, and interpreting measurement values with confidence indicators.

Displaying and Averaging IOP Results

Explains how readings are displayed, averaged, and how to clear or print results.

Low Confidence Readings (Asterisk)

Identifies readings with an asterisk indicating potential inaccuracy due to patient movement or blinks.

Low Confidence Readings (Brackets)

Explains bracketed readings, which occur when measurements differ significantly, indicating potential issues.

No Applanation and Override Functions

Covers conditions for 'No Applanation' and the 'Override' function for difficult measurements.

Communications

Helpful Tips for Using the PT100

Tips for Accurate Measurements

Maintenance

Routine Maintenance and Battery Replacement

Maintenance (Continued)

Fuse Replacement Procedure

Troubleshooting

Troubleshooting Power, Measurement, and Printer Issues

Offers solutions for common problems related to power, measurement, and printer functionality.

Product Specifications

Product Specifications (Continued)

Reichert Technologies PT100 Specifications

General IconGeneral
BrandReichert Technologies
ModelPT100
CategoryMedical Equipment
LanguageEnglish