What to do if my Reichert Manual Lensometer ML1 Microscope has no power?
If your Reichert Microscope has no power, first, ensure the instrument is not in 'sleep' mode by pressing the On-Off Switch. If that doesn't work, replace the batteries, making sure to install them with the negative side toward the spring. If the problem persists, it may be an electronic issue, and you should have the instrument serviced.
Why does my Reichert Manual Lensometer ML1 not mark the center of the lens?
If your Reichert Microscope is not marking the center of the lens, ensure that the Prism Compensator is set to “0”. Also, check that the target is centered. If the issue persists, the marker may be out of alignment, and you should have the instrument serviced.
What to do if Reichert Manual Lensometer ML1 target is not centered with no lens in place?
If the target is not centered with no lens in place on your Reichert Microscope, and the target center remains in place when the Axis Wheel is rotated, ensure that the prism compensator is set to “0”. Additionally, verify that the target is centered.
Why does my Reichert Manual Lensometer ML1 not read “0” without a lens?
If your Reichert Microscope does not read “0” without a lens in place, the eyepiece may not be focused for you. Try focusing the eyepiece. If the issue continues, the instrument may need calibration, and you should have it serviced.
What to do if Reichert Microscope high powers are off same amount in the same direction?
If the high powers on your Reichert Microscope are off by the same amount in the same direction, the vertex distance setting may be incorrect, or pads may be installed on the Lens Holder. Remove any pads. If the problem persists, the instrument may need calibration, and you should have it serviced.
What to do if Reichert Microscope target is not centered and moves when Axis Wheel is rotated?
If the target of your Reichert Microscope is not centered, and the target center moves when the Axis Wheel is rotated, the target may not be mechanically centered, and you should have the instrument serviced.
Specifies the intended use of the ML1 lensmeter for measuring spectacle and contact lenses.
Lists conditions or situations where the ML1 lensmeter should not be used.
Details the process of safely removing the ML1 lensmeter and accessories from its packaging.
Illustrates and labels the various parts, components, and controls of the ML1 lensmeter.
Step-by-step instructions for correctly installing the AAA batteries into the ML1 lensmeter.
Explains how to adjust the tilting angle of the ML1 lensmeter for optimal user comfort and convenience.
Provides clear instructions on how to power the ML1 lensmeter on and off using its main switch.
Detailed steps to focus the ML1 lensmeter's eyepiece, ensuring clear vision for accurate measurements.
Describes the correct method for placing and securing different types of lenses in the ML1 lensmeter.
Explains how to interpret readings and perform detailed analysis of lens power using the ML1 lensmeter.
Details the specific procedure for measuring and reading lenses that have a plus cylinder prescription.
Details the specific procedure for measuring and reading lenses that have a minus cylinder prescription.
Guides users on accurately locating and marking the optical center of a lens for frame fitting and layout.
Explains the method for measuring prism power using the ML1 lensmeter's reticle and specialized scales.
Describes the process to measure the addition power for various types of bifocal lenses using the ML1.
Provides instructions for measuring contact lenses using the ML1 lensmeter and its specialized holder.
Covers exterior cleaning, lens surface cleaning, and ink pad refilling for the ML1 lensmeter.
Details the procedure to center the target on the eyepiece scale for accurate measurements without a lens.
Provides a table of typical problems, their causes, and recommended solutions for the ML1 lensmeter.
General| Brand | Reichert |
|---|---|
| Model | Manual Lensometer ML1 |
| Category | Microscope |
| Language | English |
To Next Page
