Reisinger S 3000 - Default Chapter; Table of Contents

- 2 –
Table of contents of operating instructions
1.0 General............................................................................................................................3
1.1 Information 3
2.0 Product description .......................................................................................................3
2.1 Designation / Model 3
2.2 Design 3
2.3 Driving mechanism 3
2.4 Components 3
2.5 Terminal
(optional)
4
2.5.1 Basic function 4
2.5.2 Operating states 4
2.5.3 Key function 4
2.5.4 Parameter settings 4
2.5.5 Programm selector 5
2.6 Technical data 6
3.0 Scope of application ..................................................................................................... 6
3.1 Fields of application 6
3.2 Improper use 6
3.3 Safety 6
4.0 Assembly ........................................................................................................................6
5.0 Putting into operation ....................................................................................................6
5.1 Precondition 6
5.2 Set-up procedure 6
5.2.1 with terminal (plug-in terminal 50-53) 6
5.2.2 with notebook (plug-in terminal 1-3) 6
5.2.3 with >PARTLYOPEN< key (plug-in terminal 6,7) 6
5.3 Fault clearance during putting into operation procedure 7
6.0 Features ..........................................................................................................................7
6.1 Standard feature 7
6.2 Optional features 7
6.3 Safety features 7
7.0 Maintenance / Safety check...........................................................................................8
8.0 Fault clearance ...............................................................................................................8
8.1 Error code 8
9.0 Parameters ..................................................................................................................... 9
9.1 Parameter list Terminal / RS232 9
9.2 Explanations regarding parameter list 10
9.2.1 Description 10
10.0 Setup via RS232 (PC, notebook)............................................................................... 14
10.1 Configuration 14
10.2 List 15
11.0 Terminal diagrams ..................................................................................................... 16
11.1 Cable laying diagram 16
11.2 Terminal assignment 17
12.0 Dimensions.................................................................................................................18
12.1 Sectional drawing one-wing drive 18
12.2 Sectional drawing telescopic and two-wing drive 19