Need help?Do you have a question about the REL Acoustics TZERO and is the answer not in the manual?
General| Brand | REL Acoustics |
|---|---|
| Model | TZERO |
| Category | Speakers |
| Language | English |
Read all instructions, save for future use, heed warnings, and follow all instructions.
Keep away from liquids, avoid unstable surfaces, and heat sources to prevent damage or injury.
Do not service yourself; unplug if cord/liquid damaged, unit malfunctions, or is dropped.
The item is heavy; handle with care to avoid risk of injury.
Use only specified fuse rating and ensure the fuse cover is in place.
Designed for full-range reproduction, extending to very low frequencies below 30 Hz.
Supports digital formats like Dolby Digital, DTS, MPEG 2 with dedicated LFE channel.
Allows simultaneous use for stereo and home cinema, offering flexible input options.
Controls for HI/LOW LEVEL, .1/LFE LEVEL, and Crossover frequency selection.
Features LOW-LEVEL, .1/LFE inputs, HIGH-LEVEL input, and IEC mains socket.
Switches for phase adjustment (0-180 degrees) and power saving mode selection.
Three primary input options: HIGH-LEVEL (Speakon), LOW-LEVEL (phono), .1/LFE (phono).
Explains HIGH-LEVEL, .1/LFE, LOW-LEVEL inputs and phase switch operation.
General advice focusing on connecting the REL via the HIGH-LEVEL input.
Initial steps for connecting and placing the REL for optimal bass performance.
Illustrates standard and differential amplifier HIGH-LEVEL connections.
Diagrams detailing stereo and center channel subwoofer hookups.
Details connecting a REL for rear channel surround sound systems.
Instructions for connecting via phono for LOW-LEVEL and LFE inputs.
Recommends corner placement for the best low bass pressurization.
Critical step to set phase for the loudest and fullest bass response.
Fine-tuning the REL's position away from the corner for maximum output.
Adjusting crossover frequency and volume for seamless integration.
Setting up for Dolby Digital 5.1 systems, including LFE channel use.
Using multiple RELs for enhanced home theater bass performance.
Initial period of controlled use to benefit electronics and drive unit.
Maintaining cabinet finish using automotive wax and microfiber cloth.
Automatic standby mode conserves power when the unit is idle.
Disables standby for continuous readiness and immediate response.
To Next Page
