EasyManua.ls Logo

REL Strata II - Specifications

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
SPECIFICATION
TYPE REFLEX Extended response
ENCLOSURE VOLUME 40 litres
INPUT CONNECTORS Neutrik Speakon and twin
phono sockets
BASS CUT OUTPUTS:
1. Cut below 50Hz
2. Cut below 100Hz
(Both measured into 10k
ohms impedance)
GAIN CONTROL RANGE 80dB
AMPLIFIER TYPE DC coupled complementary
Mos-Fet
INPUT IMPEDANCES:
HIGH LEVEL lOOK Ohm Unbalanced
Neutrik Speakon
LOW LEVEL 10K Ohm Unbalanced, RCA
Phono
POWER OUTPUT 60 Watts R.M.S.
DRIVE UNIT Magnesium chassis, long throw
25cm
FREQUENCY RANGE 20-120Hz (upper frequency
dependent upon user settings
of ABC. Lower limit is room
dependent).
PHASING Positive, or reversed.
PHASE SWITCH POSITION 1 Gives Forward Cone Movement
For Positive Input
MAINS INPUT 220 - 240 (or 110 - 120 in certain
markets) via fused I.E.C.
standard socket.
FUSE 1 x 630mA semi-delay (220 -
240V)
1 x 1.25A semi-delay (110 -
120V) Spare fuse in sliding
drawer. Replace only with
similar type.
DIMENSIONS 416 x 518 x 3lOmm (W x H x D)
16.5 x 20.5 x 12 inches approx.
WEIGHT 18Kg, 391bs. Approx.
SUPPLIED ACCESSORIES (1) Mains lead.
(2) 10 metre Neutrik Speakon
interconnect.

Related product manuals