Relay MR004C - Location and Display Settings; Data Collector and Clock Settings

12 07.03.02, Version 1.2 User manual MR004DL/FA
GmbH, Stettiner Str. 38, D-33106 Paderborn
Page 1
Page 1
Lowest baudrate
Data collector
Highest baudr.
Passcode mode
New passcode B
Clock&Calendar
New passcode A
Display config.
These menus are only available with MR00xDL:
Read and store
Search mode
Modem mode
Testfunctions
ID of location
Data exchange
SND_NKE mode
MWh_cbm mode
Display and edit date + time. Press E-key for editing.
Format: DD.MM.YYYY
Setting up readout interval and start time.
Format: DD.MM.YYYY
Shows the ID of location (description)
Change of passcode B (global access)
Selects passcode mode:
Standard: requests passcode on startup
Access by ID/Adr: requests ID/address for single read
Manually starts a readout and storage of all meters
according to the list of slaves
Highest baudrate for automatic search
Lowest baudrate for automatic search
Change of passcode A (reader)
Selects search mode: Adr+ID,only Adr, only ID
Setup of modem mode
Testfunctions for production (passcode protected)
Display of stored data:
First select a timepoint from the list. Then all data of
this point of time are shown on the LCD.
Activate / deactivate initialize with SND_NKE
Activate / deacivate preferred display in MWh / cbm