Need help?Do you have a question about the Relay PW100 and is the answer not in the manual?
General| Brand | Relay |
|---|---|
| Model | PW100 |
| Category | Media Converter |
| Language | English |
Explains the device's operational concept and connection diagram for M-Bus communication.
Details how to mount the PW100 housing on a TS35 top-hat rail and power supply requirements.
Explains the microcontroller's role in managing M-Bus access for multiple connected interfaces.
Details the two independent RS232C interfaces, including pin assignments and connection requirements.
Describes the 2-wire RS485 interface, its transparent operation, and termination considerations.
Explains the PW100's function as an M-Bus network repeater for extending network range and capacity.
Details the USB 2.0 interface, driver installation for virtual COM port, and PC connectivity.
Explains the Ethernet interface, network integration, and the Tibbo Device Server Toolkit requirement.
Outlines necessary network preparations, including IP addressing, subnet mask, and firewall rules.
Guides through the installation of the Tibbo Device Server Toolkit for the Ethernet interface configuration.
Explains how to configure the Tibbo Device Server using DS Manager for network integration.
Details the configuration of a virtual serial port (VSP) in the PC for using the Ethernet interface.
Lists general technical specifications like operating voltage, power consumption, and housing details.
Provides detailed technical specifications for each interface (RS232C, RS485, Repeater, USB, Ethernet).
Lists article numbers and descriptions for the PW100 and related accessories.
To Next Page