Reliable 5100IS - Low Water Indicator Function; Eco Mode and Standby Functionality

TIP:
Filling your tank before the low water indicator light
flashes will prolong the life of your boiler. Example:
if your boiler runs out of water at 2:00 PM everyday,
ensure you refill your unit at noon.
CAUTION:
Prolonged periods of time with no water or low
water can be harmful to the boiler/the element
within the unit. Important: the low water indicator
light is a safety, not a function.
LOW WATER LIGHT
The 5100IS is equipped with a low water light. If the low water light is on,
please ensure to fill your unit immediately. Do not use perfumed products or
any products that contain alcohol.
ECO MODE & STANDBY
The 5100IS is equipped with Eco Mode. This feature helps to save energy
while not in use. Eco Mode keeps the boiler in a ready state and offers up to
33% less energy consumption**
12
To activate Eco Mode (Ready State), push the boiler button to the ECO position (I).
The boiler will automatically stay in ECO Mode. DO NOT STEAM in Eco Mode. This
is a ready state mode to help save energy. To reactivate the boiler, push the button
to the ON position (II). The unit will heat up in 2 - 3 minutes and be ready for
steaming. When the boiler reaches 3.5Bar / 50 PSI the boiler is ready to steam.
IMPORTANT NOTE: DO NOT STEAM IN ECO MODE. THIS IS A READY STATE TO
HELP SAVE ENERGY. IT IS NOT INTENDED FOR STEAMING.
**Based on the energy consumption required to heat up from Eco Mode to Ready
mode.