What to do if Reliable ARIA 200SP shows E1 Warning?
The E1 warning means the pressing plate and ironing board have been held together for too long. Separate them, then either unplug and plug the unit back in, or turn the press off and on again to restart it.
Why is there no heat in my Reliable Kitchen Appliances?
There might be no heat because a temperature hasn't been selected. Also, the pressing plate may have been left in a raised position for over 20 minutes, which engages the automatic shut-off.
What to do if buttons are not working properly on Reliable ARIA 200SP?
If the buttons aren't working, unplug the unit from the power outlet for 5 minutes, then plug it back in.
Why is there no steam from my Reliable ARIA 200SP Kitchen Appliances?
If there's no steam, the water level might be low, so refill the water tank. Also, the temperature setting may be too low to activate steam. Select a higher temperature and wait for the ready light to illuminate before steaming.
How to fix E3 Warning on Reliable ARIA 200SP?
The E3 warning indicates a loose wire in the thermostat. Unplug your press and call technical support.
How to fix weak steam burst output on Reliable ARIA 200SP Kitchen Appliances?
A weak steam burst output could mean the pressing plate needs cleaning. Refer to the cleaning section of the manual for the correct procedure.
How to fix if LED is not on for Reliable ARIA 200SP?
First, ensure the power cord is correctly plugged into a 120V AC power outlet. Next, check that the circuit breaker is operational. Finally, try operating the press from another power outlet.
General| Brand | Reliable |
|---|---|
| Model | ARIA 200SP |
| Category | Kitchen Appliances |
| Language | English |
To Next Page
