Reliable PRONTO 200CS - Product Components and Assembly; Component Identification; Assembly Instructions; Using the Steam Cleaner

7
SAVE THESE INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE
PARTS
A. Water Tank (250ml)
B. Water Tank Release Button
C. Main Body
D. Power Indicator Light (Blue)
E. Attachment Release Button
F. Steam Adjustment
G. Steam Release Button
H. Power Cord
I. Steam Nozzle
J. Brass Brush
K. 2x Nylon Brush
THE FOLLOWING INFORMATION IS PROVIDED FOR SERVICE BY A QUALIFIED
ELECTRICIAN ONLY:
Rated voltage: 100V,
60HZ, 1200W
This appliance must be grounded. Use only the proper type outlet when plugging in
the appliance, do not attemt to override the ground wire feature.
ASSEMBLY
Remove all components from the packaging.
1. Insert the steam nozzle into the cleaner main body until it locks into position.
2. Select desired accessory brush when needed and click into nozzle.
USE
BEFORE YOU BEGIN CLEANING
1. Remove th
e clean water tank up and out from the steam cleaner’s main body.
2. Press the water tank release button, then pull the tank backwards (Figure 1).