1230 DC CONVERTER
installation instructions
Part # 13-030
included: tools needed:
(not supplied)
Reliance recommends professional installation. If you choose to not have this product installed
by a professional, we highly recommend that you exercise caution, care, and patience when
installing this product.
Yellow: 48v/36v Input (+) From Battery
Green: 48v/36v Switched Input (+) From Keyswitch
Black: Ground (-) From Battery
Red: 12v Switched Output (+)
Blue: 12v Constant Output (+)
NOTE: If installing this product on a E-Z-GO RXV
Please see special instructions on next page.
DC Converter
Pigtail Harness
Mounting Screws
Wire Stripper/Cutters
Cordless Drill
DC CONVERTER Wiring Pigtail
To Next Page
Need help?
General