To Next PageTo Next Page
Need help?Do you have a question about the Reliance 500 Series and is the answer not in the manual?
General| Type | Safety Glasses |
|---|---|
| Material | Polycarbonate |
| D-ring locations | Not Applicable |
| Lens Material | Polycarbonate |
| Frame Material | Nylon |
| ANSI Z87.1 Compliance | Yes |
| Scratch Resistance | Yes |
| Lens Color | Clear |
| Impact Resistance | Yes |
| UV Protection | 99.9% UVA/UVB/UVC protection |
Introduces Reliance Rope Grabs, models, and company contact details.
Explains manual's intent and critical safety warnings for product use.
Details where rope grabs can be used and their operational limits like capacity.
Covers fall clearance, corrosion, chemical, heat, and electrical hazards.
Emphasizes using only Reliance-approved components and lifelines.
Specifies requirements for connectors like strength and self-locking mechanisms.
Illustrates correct and incorrect ways to make connections using snap hooks and carabiners.
Details the minimum strength required for fall arrest and restraint anchorages.
Outlines recommended specifications for lifelines including diameter, weave, and material.
Specifies minimum strength and material properties for lifelines.
Provides requirements for lanyards and recommended body support.
Stresses the importance of inspection and planning before work begins.
Discusses free fall, fall arrest forces, swing falls, and fall clearance.
Covers sharp edges, rescue plans, handling after a fall, and specific use cases like sloped roofs.
Provides step-by-step instructions for attaching the Model 5000 rope grab to a lifeline.
Continues Model 5000 attachment, including final checks and important usage warnings.
Begins the process for attaching the Model 5001 rope grab, focusing on device opening.
Details the complete installation, testing, and operational checks for the Model 5001 rope grab.
Guides on connecting lifelines to anchorages and harnesses.
Explains how to properly attach lanyards or connectors to the rope grab.
Covers proper care, cleaning, and handling of lifelines.
Outlines the steps for performing regular inspections of the rope grab.
Details inspection steps for lifelines and the importance of recording results.
Provides instructions for cleaning and lubricating the rope grab.
Lists the materials used and standards met by Reliance Rope Grabs.
Shows engraved labeling and outlines the product warranty terms.
Provides sections for logging equipment details and inspection history.
