Reliance WE7000 User Manual

7-DAY DIGITAL IN-WALL TIMER
1 Digital In wall timer Cover
Mounting screws
1
CONTENTS
WARNING
•
TO AVOID FIRE, SHOCK, OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER AND TEST THAT POWER IS
OFF BEFORE WIRING.
CAUTION
Wattage of lamps or appliances controlled must NOT exceed rated capacity. FOR INDOOR USE ONLY.
SAFETY INFORMATION
RESETTING THE TIMER
In case of an operational failure of the timer, press the RESET button to clear all settings and restart.
*Works with CFL bulbs.
*This timer has been tested to work with standard compact fluorescent (CFL) bulbs. However, it will not control a CFL bulb that specifically states
"not to be used with timer controls." If in doubt, please consult the bulb manufacturer.
SAVE THESE INSTRUCTIONS!
ON-OFF
Rating:
General: 125 VAC, 60 Hz; 15 A, 1875W
Resistive: 125 VAC, 60 Hz; 15 A, 1875W
Tungsten (incandescent): 8 Amp, 125 VAC 1000 Watts
Electronic Ballast: 500 VA
Ballast (fluorescent): 8 Amp, 125 VAC
Motor: 1/4 H.P., 125 VAC
4
Wire nuts

Reliance WE7000 Specifications

General

Brand	Reliance
Model	WE7000
Category	Timer
Language	English

Summary

7-DAY DIGITAL IN-WALL TIMER

RESETTING THE TIMER

SAFETY INFORMATION

WARNING

Avoid fire, shock, or death by turning off power at the circuit breaker before wiring.

CAUTION

Ensure controlled wattage does not exceed rated capacity; use only for indoor applications.

INSTRUCTIONS

SETTING THE CLOCK

Procedure to set the current day, hour, and minute on the timer.

SETTING PROGRAMS

Guide for programming ON and OFF times for specific days or groups of days.

PROGRAMMING AND OPERATION

PROGRAMMING GUIDELINES

Important notes on event order, overlap, and random mode for programming.

REVIEWING EVENTS PROGRAMMED

Steps to check programmed ON/OFF events.

CLEARING (DELETING) AN EVENT

Instructions on how to remove a programmed event.

OPERATING THE TIME SWITCH

How to set the timer to AUTO, RANDOM, or MANUAL modes.

OVERRIDING TIMER SETTINGS

Using ON/OFF buttons to temporarily override programmed events.