SAFETY INSTRUCTIONS
Any damage caused by the non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any
damage to property or for personal injury caused by improper handling or non-observance of the safety instructions.
- For reasons of safety the unauthorised conversion and/or modication of the device is prohibited. Please note that in the event of
damage caused by manual modication to this device any warranty claims are excluded.
- The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be exchanged
from the outside. Only qualied staff must carry out maintenance, otherwise warranty does not apply!
- Avoid any concussions or violent impact when installing or operating the device.
- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away
from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle).
- The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby
may destroy your device. Do not operate the device until it has reached ambient temperature!
- This device should only be cleaned with a damp cloth. Never use solvents or cleaning uids with a petroleum base for cleaning.
- Only use low volume levels. Long use at high volume levels can cause permanent damage to the ears.
- Make sure to operate this device at low volume levels. Using high volume levels for long periods causes permanent damage to the ears.
- Using headphones while riding bikes or driving motor bikes or cars is prohibited! Audio playback via headphones isolates ambient noise
such as carhorns.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- These professional headphones are intended for use with hi devices as well as mixing consoles for DJ applications.
- If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product,
leading to the exclusion of warranty rights.
MAINTENANCE
- Check the technical safety of the device regularly for damage to the audio cord or casing as well as for wearout of wear parts such as ear pads.
OPERATION
- Before operating the Reloop RH-2350 the volume level of the device that is used in combination with the headphones should be brought
to minimum position.
- Connect the headphones to the device. Then carefully turn up the volume and make sure not to use high volume levels as this can cause
damage to the ears.
FEATURES
- Professional DJ headphones, classic construction
- Excellent sound characteristics
- Very high output capacity thanks to 40 mm dynamic driver
- Excellent wearing comfort
- High-quality construction
- Very good foothold
- Marginal weight
TECHNICAL SPECIFICATIONS
The following specications are not veried by Global Distribution GmbH & Co. KG in terms of plausibility and accuracy:
Driver: ...................................2x 40 mm diameter
Frequency Range: .................20 Hz – 20 kHz
Sensitivity: ............................102 dB
Impedance: ...........................32 ohms
Weight: ..................................appr. 135 g
Connector: ............................3.5 mm stereo jack
Adaptor: ................................6.3 mm stereo jack
Cord: ..................................... m +/-10%
ENGLISH
To Next Page
Loading...
