General Specification
1. Power Source: AC 230V, 50Hz, 29 Watts.
2. Dimensions: 320 (W) x 357 (D) x 89 (H) mm
3. Weight 5.8 Kgs
4. Features:
(1) VCA controlled channel and cross fader.
(2) Fader curve adjustment for channel & cross fader.
(3) Channel fader reverse function.
(4) Kill switches for cross fader assignment.
(5) Channel & cross fader replaceable.
(6) 8 Digital effects.
(7) Cross fader start control for CD player.
(8) Master and channel PFL level meter.
(9) Microphone talkover function.
(10) Duplex USB Device.
5. Input/Output impedance & sensitivity: (EQ Flat, Maximum GAIN, Master1=0dBV Output, Load=100K OHM)
Line 20K OHM /-14dBV (200mV) +/-2dB
Phono 47K OHM /-54dBV (2mV) +/-2dB
Mic1 2.2K OHM /-54dBV (2mV) +/-2dB
Mic2 3K OHM /-60dBV (1mV) +/-2dB
Return 22K OHM /-10dBV (316mV) +/-2dB
Rec 1K OHM /-10dBV (316mV) +/-2dB
Mastere Unbal. 1K OHM
Master1 Xlr 600 OHM /+4dBm (1.23V) +/-2dB (Load=600 OHM)
Master2 1K OHM /0dBV (1V) +/-2dB
Phones 33 OHM /-1dBV (891mV) +/-2dB (CUE PAN AT CENTER) (Load=32 ohm)
Send 2K OHM /-10dBV (316mV) +/-2dB
6. Frequency response: (EQ Flat, Maximum GAIN, Master1=0dBV Output, FX OFF)
Line, Return 20 - 20K Hz +/- 2dB
Phono 20 - 20K Hz +2/-3dB (RIAA)
Mic 20 - 20K Hz +2/-3dB
USB 20 - 20K Hz +/- 2dB
7. THD + N: (EQ Flat, Maximum GAIN, Master=0dBV Output, w/ 20k Hz LPF)
Line Less than 0.02% at 1KHz (FX OFF)
Less than 0.05% at 1KHz (FX ON, DRY)
Return Less than 0.02% at 1KHz
USB Less than 0.02% at 1KHz (FX OFF)
8. Maximum Input: (Master Output, THD=1%, EQ Flat, Maximum GAIN, FX OFF)
Line More than +4dBV
Return More than +8dBV
Phono More than -36dBV
Mic1 More than -36dBV
Mic2 More than -42dBV
9. Maximum Output: (EQ Flat, Maximum GAIN, FX OFF, THD=1%)
Send, Rec More than +8dBV (2.5V)
Master1, Master2 More than +18dBV (8.0V)
Phones More than +4dBV (1.6V) at load=32 OHM
10. Output Noise: (Maximum GAIN, EQ Flat, A-Weighted, FX & CH ASSIGN OFF)
Line, Return Less than -80dBV
Phono Less than -66dBV
Mic1 Less than -65dBV
Mic2 Less than -60dBV
To Next Page
Loading...
