EasyManua.ls Logo

Rem-Fit zeeq User Manual

Rem-Fit zeeq
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER MANUAL
Question and Answer IconNeed help?

Do you have a question about the Rem-Fit zeeq and is the answer not in the manual?

Rem-Fit zeeq Specifications

General IconGeneral
Product CategorySmart Pillow
ConnectivityBluetooth
CompatibilityiOS and Android
Power SourceRechargeable Battery
FeaturesSleep tracking
MaterialMemory foam

Summary

User Manual Overview

Welcome to ZEEQ

ZEEQ Remote

ZEEQ Functions

Power Button

Press and hold the power button for 5 seconds to cycle the device on or off.

Wake Mode LED

The LED will turn green when the ZEEQ is in 'Wake' mode.

Sleep Mode LED

The LED will turn blue in 'Sleep' mode and dim after 5 seconds.

ZEEQ Functions - Controls

Volume and Track Control

Click '+' for volume up/skip track, click '-' for volume down/previous track.

Reset Function

Use a pin to press the reset button to reboot the ZEEQ device.

ZEEQ Lights

Battery Status Indicators

ZEEQ blinks white when powered on to indicate battery status.

Access Denied Scenarios

ZEEQ blinks red/white if sleep mode is attempted while charging.

ZEEQ Music

Speaker Mode Activation

Press power button three times in two seconds to enable speaker mode.

Speaker Status Check

Press and hold '+' and '-' buttons simultaneously to check speaker status.

"5-Click" Sleep Feature

Configuring 5-Click Sleep

Enable '5-Click' in the ZEEQ app, set alarm, and save settings.

Using 5-Click Sleep

Press the power button 5 times to start/stop sleep mode.

ZEEQ Auto Sleep

Enabling Auto Sleep

Enable 'Auto Sleep' in the ZEEQ app and configure start time and duration.

Auto Sleep Sensitivity

Adjust sensitivity to determine how quickly ZEEQ enters Auto Sleep.

Frequently Asked Questions

Music Playback Issues

Check Bluetooth connection to REM-Audio and ensure no other devices are connected.

ZEEQ Speaker Usage

Use ZEEQ app for speaker mode, timer, and music selection.

Snore Alarm Not Vibrating

Ensure Snore Alarm is enabled in the app and adjust sensitivity.

Battery Status Check

View battery status in the ZEEQ app or during device power-up.

Product Specifications

Model and Dimensions

Model RFZQ01, dimensions 16.75 H x 26.5 W x 5.5 D inches.

Battery and Wireless

Lithium Ion 3.7v battery, 5000mah capacity, music/data transmission.

App Requirements

Requires iOS 8.2+ or Android 4.3+ with BLE support.

Care and Maintenance Guidelines

Battery Handling

Battery is not user replaceable; dispose of according to local laws.

Product Usage Precautions

Do not bend excessively, use during recharging, or expose to water.

Environmental Considerations

Avoid extreme temperatures, direct sunlight, and high humidity.

Health and Safety Information

Medical Device Disclaimer

ZEEQ is not a medical device; consult physician before use.

User Safety Warnings

Caution with small parts, do not use while charging, handle damaged units.

Pacemaker Contraindication

Product must not be used by persons with a heart pacemaker.

FCC Compliance Statement

FCC Rules Compliance

Device complies with Part 15 of FCC Rules; may not cause harmful interference.

Interference Mitigation

User encouraged to correct interference by reorienting antenna or separating devices.

Additional Regulatory Statements

Industry Canada Compliance

Device complies with Industry Canada license-exempt RSS standards.

Trademark and Awards

Information on ZEEQ and REM-Fit trademarks and CES Innovation Awards.

Product Disposal and Recycling

Proper disposal of the product to prevent environmental harm.