EasyManua.ls Logo

REMEZair AquaStream S - User Manual

REMEZair AquaStream S
20 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...

Перед использованием данного устройства
внимательно прочитайте инструкцию
Устройство предназначено для эксплуатации
только в помещении

Please read the instructions carefully before
using this device
The device is intended for indoor use only

Lesen Sie bitte die Anweisungen sorgfältig
durch, bevor Sie dieses Gerät verwenden
Das Gerät ist nur zum Gebrauch
in Innenräumen vorgesehen

Беспроводной моющий пылесос
Cordless washing vacuum cleaner
Kabelloser Waschsauger


Questions and Answers

  • C
    Candace JacksonAug 13, 2025
    Why does my REMEZair Vacuum Cleaner have low suction power?
    • D
      Donna SanchezAug 13, 2025
      If your REMEZair Vacuum Cleaner has low suction power, the HEPA filter might be dirty or not completely dry. Check the HEPA filter and clean it if necessary. If it's wet, make sure to dry it thoroughly before using it again.
  • J
    Justin RodriguezAug 17, 2025
    How to fix REMEZair Vacuum Cleaner that does not charge?
    • R
      Ruben JohnsonAug 17, 2025
      If your REMEZair Vacuum Cleaner isn't charging, ensure the charging connector is fully inserted into the charging socket and that the charging device is properly plugged into the wall outlet.
  • T
    Travis TannerAug 20, 2025
    Why is the clean water tank leaking on my REMEZair Vacuum Cleaner?
    • C
      Christine LynchAug 20, 2025
      If the clean water tank of your REMEZair Vacuum Cleaner is leaking, make sure it's installed correctly and that the tank cover is tightly screwed on.
  • A
    Adam LeeAug 25, 2025
    What to do if control buttons do not work on REMEZair AquaStream S Vacuum Cleaner?
    • S
      Stacey McbrideAug 25, 2025
      If the control buttons on your REMEZair Vacuum Cleaner aren't working, check the battery power and fully charge it if needed. Also, ensure the handle is correctly reinstalled to establish proper contact with the device body.
  • D
    dkramerAug 28, 2025
    Why is no water spraying from my REMEZair Vacuum Cleaner?
    • L
      Linda SmithAug 28, 2025
      If your REMEZair Vacuum Cleaner doesn't spray water, first ensure the clean water tank is filled. Then, check that the clean water tank is correctly installed.
  • R
    ricardo02Aug 31, 2025
    What to do if REMEZair AquaStream S does not operate in self-cleaning mode?
    • L
      Lisa SteeleSep 1, 2025
      If your REMEZair Vacuum Cleaner doesn't operate in self-cleaning mode, ensure that the dirty water tank is empty and the clean water tank is full.
  • D
    Daniel MendozaSep 4, 2025
    How to calibrate the clean water indicator on REMEZair Vacuum Cleaner?
    • D
      devinowensSep 4, 2025
      If the indicator for the presence of clean water in the tank of your REMEZair Vacuum Cleaner is not working correctly, remove the clean water tank, then start the self-cleaning mode. Then hold down the On/Off button and the Eco/Max button at the same time for 5 seconds, until the display blinks twice. Release the buttons and check if the faul has been eliminated.
  • S
    Susan JonesSep 8, 2025
    How to turn on voice assistant on REMEZair Vacuum Cleaner?
    • L
      Lori HarrisSep 8, 2025
      To turn the voice assistant on or off on your REMEZair Vacuum Cleaner, press the button located on the back of the vacuum cleaner body.

Summary

User Manual Overview

Safety and Environmental Guidelines

General Safety Measures

Essential precautions for safe operation, handling, and storage of the appliance, covering electrical safety and user care.

Warning and Cautionary Notes

Alerts regarding specific operational risks such as foam formation, improper use, and potential damage to the engine.

Battery Safety and Handling

Rules for safe charging, use, and storage of the lithium-ion battery to prevent hazards.

Environmental Protection

Guidelines for responsible disposal of the product at the end of its service life.

Product Components Identification

Appliance Assembly and Operation

Handle Assembly and Disassembly

Instructions on how to connect and disconnect the handle from the main unit of the vacuum cleaner.

Control Panel and Modes

Explanation of the appliance's controls, operating modes (Eco/Turbo), and display indicators.

Clean Water Tank Management

Guide on filling the clean water tank with water and detergent, and installing it correctly.

Voice Assistant Functionality

Details on activating and deactivating the voice assistant feature on the vacuum cleaner.

Maintenance and Setup Procedures

Dirty Water Tank Cleaning

Step-by-step guide for removing, emptying, cleaning, and reinstalling the dirty water tank and its HEPA filter.

Brush and Cover Installation

Instructions for correctly installing the roller brush and the transparent cover for the main nozzle.

Charging Station Setup

Guidance on positioning and connecting the charging and self-cleaning station for the appliance.

Self-Cleaning, Specifications, and Troubleshooting

Self-Cleaning Mode Operation

Procedure for performing the non-contact three-stage self-cleaning cycle, including preparation and post-cleaning steps.

Technical Specifications

Key performance data and physical attributes of the vacuum cleaner, such as power, battery, and dimensions.

Common Troubleshooting Issues

A list of common problems encountered with the appliance and their corresponding solutions.

Advanced Troubleshooting and Fault Codes

Performance Issue Resolution

Solutions for specific operational problems like water droplets, difficulty moving, or foam collection.

Fault Code Table

Explanation of error codes displayed by the appliance and recommended actions for resolution.

REMEZair AquaStream S Specifications

General IconGeneral
BrandREMEZair
ModelAquaStream S
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals