Remington 490 - Table of Contents; Product View

2
101274
REMINGTON
490-02
INDEX
Warning: Safety Precautions................................ 3-11
Why A Fastener Holds ............................................ 12
Selecting Fasteners and Powder Loads ................. 13
Operation .......................................................... 14, 15
Parts List ................................................................. 16
Accessories ............................................................. 16
Barrel Replacement .......................................... 17, 18
Tool Disassembly and Assembly ...................... 18, 19
Troubleshooting ................................................ 20, 21
Fasteners ................................................................ 21
Replacement Parts and Accessories ...................... 22
Technical Service .................................................... 22
Repair Service......................................................... 22
Parts Centrals ......................................................... 23
Application Chart ............................................... 24, 25
Warranty.................................................... Back Cover
Powder Load*
Trigger
Barrel Assembly
* Not provided with tool.
Spall
Shield*
Recommended
Approved Eye
Protection*
Muzzle
REMINGTON
®
Powerdriver Models 489 and 490
The Remington
®
Powerdriver Models 489 and 490 are
designed for use with Remington
®
powder .22 caliber
Type A neck-down crimped loads and Remington
®
Power
Fasteners which are no longer than 2
1
/
2
" or power
washer fasteners no longer than 3". Remington
®
Power
Fasteners are manufactured from special steel and heat
treated to produce a very hard yet ductile fastener.
Power Fastener*