Remington AS7051 - Product Components and Usage; Parts Identification; Styling Procedures and Tips

4
• If the supply cord of this unit becomes damaged, discontinue use
immediately and return the appliance to your nearest authorised
Remington® service dealer for repair or replacement in order to avoid a
hazard.
• Do not allow any part of the appliance touch the face, neck or scalp.
• Keep the power plug and cord away from heated surfaces.
• Do not use attachments other than those we supply.
• Do not use the appliance if it is damaged or malfunctions.
• Do not twist or kink the cable, or wrap it round the appliance. Check the cord
regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. 1000W power handle
2. 50mm thermal mixed bristle brush
3. 30mm retractable bristle curling brush
4. 21mm thermal mixed bristle brush
5. Concentrator
6. Speed/ heat setting switch
7. Cool shot
8. Attachment lock/release button
9. Heat proof storage bag
10. Swivel cord
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain ammable material – do not use while using this product.
• Section the hair prior to styling. Style the lower layers rst.
• Select your attachment before you turn on the appliance.
• Attachments can be connected to the power handle by aligning the arrow above the
attachment lock/release button with the power handle and clicking to the left to lock.
1. Plug the product into the mains power supply.
2. The product can be switched on by sliding the heat/speed setting switch to position G
3. Dry roots completely and dry length 90% dry, ready for styling.
4. To dry hair use the concentrator attachment.
5. For smaller and medium curls use the 21mm thermal bristle brush. Best for use on
short and medium length or layered hair.
6. To create medium to loose curls use the 30mm retractable brush.
7. The 50mm thermal volume brush adds root volume and fullness. it can also be
used to x the ends of long hair and smooth out natural curls.
8. Select the desired temperature and speed setting using the switch on the handle.