Remington BHT2000A - Battery Removal; Battery Removal Procedure

8
BATTERY REMOVAL
• Thebatterymustberemovedfromtheappliancebeforeitisscrapped.
• Theappliancemustbedisconnectedfromthesupplymainswhenremoving
the battery.
• Ensuretheclipperisdischargedofallpoweranddisconnectedfromthe
mains.
• Removethetrimmerheadorshaverhead.
• Unscrew1screwlocatedonthebackhousingofthetrimmer.
• Liftorprytheclipperhalvesapart,exposingtheinnerhousing.
• Unscrew2screwslocatedontheinnerhousing.
• Removetheinnerhousing,liftorprytheinnerhousingtoupperandlower
part.
• Removethebatteryandprintedcircuitboardassemblyfromthelowerpart.
• Cutthetabsonbothendsofthebatteryandremovefromtheprinted
circuit board.
• Thebatteryistobedisposedofsafely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
ENGLISH