Remington BHT250 - Cleaning and Maintenance; Battery Removal and Disposal; Environmental Protection Guidelines; Service and Guarantee Information

6
C CLEANING AND MAINTENANCE
• To ensure long lasting performance clean after each use.
• Ensure the appliance is switched o and unplugged from the mains.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head under the tap after use while the blades are running.
• Allow water to run into and through the wash out port to help wash any
hair trimmings from the inside out.
, Note: Suitable for cleaning under water.
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• Theappliancemustbedisconnectedfromthesupplymainswhenremoving
the battery.
• Ensurethetrimmerisdischargedofallpower.
• Firstly,prytheTST(detailblade)headhousingusingasingle-sidescrewdriver.
• Usingasmallscrewdriver,unscrew2screwsonthebackhousingofthe
trimmer.
• Continuouslyprythefronthousingusingthesingle-sidescrewdriver.
• PrythePCBholderassemblyagainusingthesingle-sidescrewdriverfromthe
back housing so you can see the PCB and batteries exposed.
• DestroythePCBholderusingawirecutter,cutthetabsonbothendsofthe
battery assembly and remove the PCB.
• Disposeofthebatteriessafely.
H ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
E SERVICE AND GUARANTEE
Defects aecting product functionality appearing within the guarantee period will
be corrected by replacement or repair at our option provided the product is used
and maintained in accordance with the instructions.