OILING THE BLADES
Your trimmer is fitted with high quality stainless steel blades, which remain
permanently lubricated in a dry environment. If you use your trimmer in the
shower or rinse it under running water, you will periodically need to add
a drop of oil to the cutting blades to keep them operating at peak
performance. Simply remove the adjustable trimmer comb and place a drop
of oil on the teeth of the cutter assembly.
% Use only light grade oil like sewing machine oil, these will not evaporate
and will not slow down the blades.
% Do not use hair oil, grease or any oil mixed with kerosene or solvent,
as the solvent will evaporate and leave the thick oil, slowing the blades.
STORAGE
% Always store this appliance and cord in a moisture-free area.
% Do not wrap the cord around the appliance or charging stand.
TROUBLESHOOTING
If the trimmer does not work when turned on:
% Charge your trimmer, refer to the charging your trimmer section.
What if the groomer fails to hold a charge?
% Fully discharge the groomer by running until completely stopping.
Next, follow recharging instructions described previously.
If trimmer cutters do not move:
% The cutting unit may be dirty and clogged. Clean the unit as directed
in the cleaning and maintaining section.
8
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
To Next Page
Loading...
