How to Use
Thermal Glove Warning:
The heat protective glove helps protect fingers from excessive heat from the hair curling wand during styling for
limited time. The glove will not protect the user from touching the barrel directly, and these gloves are not for use to
protect from other sources of heat.
How to Use
Hair should be clean, dry, or nearly dry, and free of tangles before using. (This iron can also be used for quick touch-
ups any time.)
1. Rest the iron on its stand on a smooth, flat surface. Plug it in for connection to a 120 volt power supply.
2. Press and hold the ON/ OFF button until the unit turns on and the LCD lights up.
3. Adjust the temperature using the +/- buttons. A series of three indicator bars will flash while the unit heats up,
then glow steadily when it has reached the selected temperature.
4. To lock the temperature buttons, press and hold the “–” button for 2 seconds and a key icon will appear. To
unlock, press and hold “–” button for another 2 seconds and the key icon will disappear.
How to Use Your Curling
Wand to get Professional Results
This unique wand has been designed with multiple temperature settings, providing very high heat settings for curling
very coarse, thick, hard-tocurl hair; very low heat settings for curling extra fine, damaged or dry hair; and a full range
of heat settings in between for all normal textures and thicknesses of hair.
Test a small section of hair before using; then adjust temperature depending on hair type.
1. Set wand to your desired temperature.
To Next Page
Loading...
