A Superior Cut
Every Time
Use and Care Guide
Models HC-1000, HC-1050, HC-2000
Register Your New Product Today!
By registering your new Remington
®
product, you will receive these important benefits:
Proof of Ownership • Product Protection • Product Registration • Special Offers
Register online at: www.RemingtonProducts.com
IMPORTANT SAFETY
INSTRUCTIONS
When using an electrical appliance,
basic precautions should always be
observed, including the following.
Read all instructions before using
this appliance.
DANGER
To reduce the risk of electric shock:
■ Do not reach for an appliance that
has fallen into water. Unplug it
immediately.
■ Do not use while bathing or in
the shower.
■ Do not place or drop into water
or other liquid.
■ Do not place or store this appliance
where it can fall or be pulled into a
tub or sink.
■ Always unplug this appliance from
the electrical outlet immediately
after using.
■ Unplug this appliance before
cleaning it.
■ Do not use outdoors or operate
where aerosol (spray) products are
being used, or where oxygen is
being administered.
■ Always store this appliance and
cord in a moisture-free area.
Do not store it in temperatures
exceeding 140°F (60°C).
■ Do not plug or unplug this
appliance when your hands are
wet.
■ Do not use an extension cord
or a voltage converter with this
appliance.
■ Always attach the plug to the
appliance, then to the outlet. To
disconnect, turn all controls to
OFF, then remove plug from outlet.
Detach removable power cords
from appliances for storage.
■ Do not place this appliance on any
surface while operating.
■ This appliance has a polarized plug
(one blade is wider than the other).
As a safety feature, this plug will
fit in a polarized outlet only one
way. If the plug does not fit fully
in the outlet, reverse the plug. If it
still does not fit, contact a qualified
electrician. Do not attempt to
defeat this safety feature.
■ Do not use this appliance with a
damaged or broken cutting unit,
as injury may occur. Always make
certain blades are aligned properly.
■ This clipper is designed for use
with 120 Volts AC, 60 HZ electrical
outlets. Do not connect the clipper
to a higher voltage than indicated,
as it may result in personal injury
and/or damage to the clipper.
WARNING
To reduce the risk of burns, fire,
electric shock or injury to persons:
■ This appliance is for household
use only.
■ An appliance should never be left
unattended when it’s plugged in.
■ Close supervision is necessary
when this appliance is used by,
on, or near children or persons
with special needs.
■ Use this appliance only for its
intended use as described in this
manual. Do not use attachments
not recommended by Spectrum
Brands, Inc.
■ Keep the cord away from heated
surfaces.
■ Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or if it has
been dropped into water. If any
of these things happen, return
the appliance to a Remington
authorized service center for
examination and repair.
■ Never drop or insert any object into
any of the appliance’s openings.
SAvE ThESE INSTRUCTIONS
Product Features
Congratulations on your purchase of one of the finest hair clippers available
today. Your Remington
®
hair clipper is designed to perform dependably and
efficiently for years, helping you maintain a range of hair styles.
HC-1000 HC-2000
1
2
21
HC-1050
3
6
7
8
10
11
12
13
16
14
15
19 20
18
17
4
5
How to Use
Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1. To insert plug, grasp it firmly and
guide it into outlet.
2. To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance. Do not wrap the cord
around the appliance.
Blade Care
The life of your clippers will depend
on frequency of use, care, hair type
and condition. The HC-1000
and HC-2000 have blades which
do not require additional oiling. The
HC-1050 has blades that require
additional oiling. To maintain the
blades in peak condition apply oil
after every three or four haircuts.
Place a few drops of the included oil
on the teeth of the blades. Turn the
clipper on for fifteen seconds then
turn off.
9
Part HC-1000 HC-1050 HC-1050 HC-1050 HC-2000B HC-2000
Total Pieces 12 12 14 16 18 22
1. Hair Clipper
2. Blade Guard
3.
1/8" Guide Comb
4. 1/4" Guide Comb
5. 3/8" Guide Comb
6. 1/2" Guide Comb
7. 5/8" Guide Comb
8. 3/4" Guide Comb
9. 7/8” Guide Comb
10. 1" Guide Comb
11. Right Ear Guide
12. Left Ear Guide
13. Styling Comb
14. Scissors
15. Barber's Cape
16. Sectioning Clips
17. Neck Brush
18. Cleaning Brush
19. Storage Case
20. How-To Style Guide
21. Oil Bottle
x
x
x
x
x
x
x
x
x
x
2x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
3x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
4x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
To Next Page
Need help?
General
