4
NOTE: Ensure that the clipper is turned off when cleaning.
CLEANING CAUTIONS
Cleaning should only be done with a soft brush, such as the brush supplied with
the product.
Only use the light-grade oil supplied or sewing machine oil on the blades.
Do not use harsh or corrosive cleaners on the units or their blades.
Do not submerge in water as damage will occur.
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE, OR
INJURY TO PERSONS:
An appliance should never be left unattended when plugged into a power outlet.
Keep the power plug and cord away from heated surfaces.
Make sure the power plug and cord do not get wet.
Do not unplug the product with wet hands.
Do not use the product with a damaged cord. A replacement can be obtained via our
International Service Centres.
Charge, use and store the product at a temperature between 15°C and 35°C.
Always unplug from the mains when cleaning.
Only use the parts supplied with the appliance.
Keep this product out of reach of children. The use of this appliance by persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge can
give cause to hazards. Persons responsible for their safety should give explicit instructions
or supervise the use of the appliance.
PROTECT THE ENVIRONMENT
The product contains a Nickel Metal Hydride cell unit. Do not dispose of the clipper in
household waste at the end of its useful life. Disposal can take place at our service centres or
appropriate collection sites.
ENGLISH
080714_REM_IFU_HC330_22L.indd GB_4080714_REM_IFU_HC330_22L.indd GB_4 05.11.2008 11:48:18 Uhr05.11.2008 11:48:18 Uhr
To Next Page
Loading...
