Remington HyperFlex Aqua XR1430 - C Getting Started; Charging Stand

4
C GETTING STARTED
It is recommended that you use your new shaver daily for up to four weeks to
allow time for your beard and skin to become accustomed to the new shaving
system.
, CHARGING STAND
• Rotate open the charge stand fully to stand rmly on a at surface while
charging. For travel you can fold the stand around the shaver (see below).
, CHARGING YOUR SHAVER
• Ensure the appliance is turned o.
• Connectthechargingstandtotheadaptorandthentothemains.
• Placetheshaverinthechargingstand.
• Chargeforatleast24hourswhenusingforthersttime.
• Allow90minutesforafullcharge(XR1450andXR1470)and4hoursfor
XR1430.
• Thechargingindicatorlight(XR1430),fuelgauge(XR1450)orLCDdisplay
(XR1470) will indicate when the shaver is fully charged.
, XR1430: When charge is low, the top LED will illuminate a solid red light.
When charging the bottom LED will illuminate a solid green light. When fully
charged both LEDs will be o.
ENGLISH