Remington HyperFlex Aqua XR1430 - Page 6

6
, To Set the Travel Lock:
• Press and hold the on switch for 3 seconds. The shaver will turn on, then will
shut o after the 3 seconds. The LED display will ash ve times to indicate
the lock is set.
• While the travel lock is set, if the on switch is pressed, the LED display will
ash three times to indicate the shaver is in travel lock mode.
, To Unlock the Travel Lock:
• Press and hold the on switch for 3 seconds. The LED display will ash three
times while the button is being held and then the shaver will turn on.
, Turbo feature (XR1470 only)
• The XR1470 comes with a Turbo feature to shave thick stubble. Press the
on/o switch once to operate the shaver at normal speed. Press the on/o
switch a second time to operate the shaver in Turbo mode. When the Turbo
feature is activated the LED display will cycle around.
• Todeactivatepresstheonoswitchoncetoturntheshavero.
E TIPS FOR BEST RESULTS
• Use moderate to slow stroking movements. The use of short circular motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
• DONOTpresshardagainsttheskininordertoavoiddamagetotherotary
heads.
C CARE FOR YOUR SHAVER
• Careforyourappliancetoensurealonglastingperformance.
• Werecommendyoucleanyourproductaftereachuse.
• Theeasiestandmosthygienicwaytocleantheapplianceisbyrinsingthe
appliance head after use with warm water.
, CLEANING
ENGLISH