6
TO REMOVE AN ATTACHMENT
• Align the symbol with the
mark and pull the attachment off the
handle.
SPEED AND TEMPERATURE SETTINGS
• To turn the appliance on slide the speed/heat selector switch to N for
the low heat setting, O for high heat or
for the cool setting.
Temperature Hair Type
Low N
For gentle styling
High O
Ideal for thick and difficult to style hair
Cool
Helps to set your style with cool air
ROTATION SETTINGS
• Only the 40mm brush rotates.
• To use the rotating function press the right arrow (+) on the rotation
switch to rotate the attachments clockwise and the left arrow (-) to
rotate the attachments anticlockwise.
Note: The brush attachment will only start rotating when a temperature
setting has been selected.
CREATE VOLUME AND SHAPE USING THE 40MM ROTATING BRUSH
• To dry your roots and add volume, place the brush underneath the
section close to the roots and hold for a few seconds, lifting the hair
as you dry.
• Move the styler downwards through the hair section, at the same time
rotate the brush away from the head by pressing and holding - or +
as required.
• Keep moving the styler downwards to resist the brush rotation. Doing
this will create tension through the section of hair.
• If the brush spins too quickly release the rotation switch and remove
the brush from your hair.
• To create shape, continue rotating the brush until you reach the ends
of the hair and then roll the ends under.
To Next Page
Loading...
