Remington K Series - User Manual

Need help?

Do you have a question about the Remington K Series and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document is an operator's manual for a Self-Propelled Mower, specifically the All Wheel Drive Model Series K and L. It provides comprehensive instructions for safe operation, assembly, set-up, maintenance, and troubleshooting.

Function Description

The Self-Propelled Mower is designed primarily for cutting grass. It features an all-wheel drive system, which enhances its maneuverability and performance on various terrains. The mower can be configured for mulching, side discharge, or bagging grass clippings, offering versatility based on user preference and lawn conditions.

Important Technical Specifications

While specific numerical technical specifications (e.g., engine horsepower, cutting width, weight) are not explicitly detailed in the provided excerpts, the manual highlights several key operational and safety features that imply certain technical characteristics:

Engine: The mower is equipped with an internal combustion engine. It requires regular unleaded gasoline and oil, with specific instructions for initial fill-up and maintenance. The engine's exhaust system may include emission control systems such as Engine Modification (EM), Oxidizing Catalyst (OC), Secondary Air Injection (SAI), and Three Way Catalyst (TWC) to comply with California and federal EPA regulations for SORE (Small Off Road Equipment). A spark arrestor is mentioned as a requirement for use on unimproved forest-covered, brush-covered, or grass-covered land.
Drive System: It features an All Wheel Drive system, with separate controls for front-wheel drive and rear-wheel drive engagement. The drive control cables can be adjusted to ensure proper self-propulsion.
Cutting Deck: The mower has a cutting deck with adjustable height. It can be equipped with a deck wash system for easy cleaning of the underside.
Blade: The cutting blade is a critical component, with instructions for periodic inspection, sharpening, balancing, and replacement. The blade control acts as a safety device, stopping the blade within three seconds when released.
Battery (If Equipped): Some models include an electric starter with a battery. The battery requires charging using a standard 120V household outlet, with specific charging times and handling precautions due to corrosive fluid and toxic material.
Safety Devices: Key safety features include a blade control, discharge cover, grass catcher, and trail shield. The manual emphasizes that these devices must be in place and working correctly for safe operation.

Usage Features

Starting and Stopping: The engine is started by pulling a cord (for manual start) or using an electric starter (if equipped). The blade control must be held against the upper handle to engage the blade and keep the engine running. Releasing the blade control stops the engine.
Cutting Height Adjustment: The mower offers dual-lever cutting height adjustment. Levers are located above the right front wheel (front) and left rear wheel (rear). Both front and rear wheels must be placed in the same relative position to prevent scalping.
Handle Pitch Adjustment (If Equipped): The handle's pitch can be adjusted to one of three comfortable positions using wing nuts and carriage bolts.
Drive Control: The all-wheel drive system allows for engagement of rear-wheel drive, front-wheel drive, or all-wheel drive. Separate levers control the front and rear wheel drives. For all-wheel drive, only one lever needs to be held once engaged. Drive control cables can be adjusted to ensure proper self-propulsion.
Grass Management:
- Mulching: To mulch grass, the side discharge chute (if equipped) or grass catcher (if equipped) must be removed, allowing the rear discharge door to close. Mulching is not recommended for wet grass or grass taller than four inches.
- Side Discharge: To convert to side discharge, the grass catcher must be off, the rear discharge door closed, and the mulch plug lifted to allow the side discharge chute to be attached.
- Bagging: The grass catcher collects clippings. The mower should be operated until the bag is full, then the engine stopped, and the bag removed and emptied.
Slope Operation: A slope gauge is provided to determine safe operating angles (not exceeding 15 degrees). The manual strongly advises caution on slopes, operating across them (not up and down), and turning uphill.
Safety Precautions: The manual stresses the importance of wearing safety glasses, sturdy shoes, and close-fitting clothing. It warns against operating the mower in wet grass, with bystanders within 75 feet, or under the influence of alcohol or drugs. It also highlights the dangers of thrown objects, blade contact, and abnormal vibrations.

Maintenance Features

General Recommendations: Emphasizes adherence to safety rules, regular checks of fasteners, and avoiding engine speed changes.
Deck Care: The underside of the mower deck should be cleaned after each use to prevent grass clipping buildup. This involves running the engine out of fuel, disconnecting the spark plug wire, tipping the mower, and scraping the deck.
Deck Wash System (If Equipped): For models with a water port, the deck wash system allows for easy rinsing of the deck's underside. This involves attaching a garden hose nozzle to the water port, turning on the water, running the engine for two minutes, then stopping the engine, turning off the water, and detaching the nozzle.
Engine Care:
- Oil Level: Maintain oil level as instructed in the Engine Operator's Manual.
- Air Cleaner: Service every 25 hours of use or more frequently in dusty conditions.
- Spark Plug: Clean and reset the gap annually; replacement is recommended at the start of each mowing season.
- Engine Cleaning: Regularly clean the engine with a cloth or brush, ensuring proper air circulation and removing debris from the muffler area.
- Fuel Stabilizer: Use for engines stored between 30 and 90 days to prevent fuel deterioration.
Lubrication: Pivot points of the blade and drive controls should be lubricated at least once a season with light oil. Ball bearing wheels (if equipped) also require annual lubrication. The transmission is factory-sealed and does not require lubrication.
Blade Care: Periodically inspect the blade adapter for cracks. The blade should be removed for sharpening or replacement, ensuring it is balanced to prevent excessive vibration.
Belt Care: Belt replacement requires removal of several components and should be performed by an authorized Service Dealer.
Battery Replacement (If Equipped): Instructions are provided for safely removing and replacing the battery, emphasizing precautions due to sulfuric acid.

Remington K Series Specifications

General

Brand	Remington
Model	K Series
Category	Lawn Mower
Language	English