Remington PG6000 - Eyebrow Trimming; Precision Trimming; Micro Stubble Finish; Precision Trimming Techniques

8
2. Insert the attachment gently into the nostril or ear.
3. Gently move the attachment in and out while rotating the body of the groomer at
the same time.
• Don’t insert the attachment more than 6 mm.
• Wash the attachment after each use.
Eyebrow:
1. Carefully guide the attachment to remove any stray or longer hairs from the
eyebrow.
2. To completely remove hairs, let the attachment touch the skin then move over the
desired area.
MICRO STUBBLE AND PRECISION TRIMMING
Attachments
Precision trimmer
Micro stubble:
The precision trimmer attachment has Trim Shave Technology which trims hair down to
0.2 mm to leave a micro stubble nish.
1. Fit the precision trimmer.
2. Hold the attachment so that the guide on the lower edge of the blade contacts the
skin (the same way you would hold a wet razor). The guide on the lower edge of the
blade helps to stretch the skin during trimming.
3. Use motions similar to wet shaving.
Precision trimming:
1. Hold the precision trimmer attachment perpendicular to the skin.
2. Move it towards or away from the beard hair to achieve the desired result. Use gentle
pressure and controlled movements.
DEEP CLEANSING BRUSH HEAD
Attachments
Deep cleansing brush head
1. Moisten the brush bristles by running under water. NOTE: DO NOT use the brush
head whilst completely dry as this can cause skin irritation.
2. Dampen your skin with water and apply face wash onto your skin. Alternatively,
apply your face wash directly onto the brush.
3. We recommend cleansing with the Deep Cleansing brush in 3 sections:
• T-Zone (1), Right side (2) and Left side (3).
4. Switch on using the On/O button.