Remington PG6032 - Using the Detail Trimmer Attachment; Using the Mini Foil Shaver; Remington Groomer Care and Maintenance; Cleaning Your Groomer After Use

6
USING THE DETAIL ATTACHMENT
• Hold the groomer with the surface (back side) of the blade guides against the skin.
• Use motions similar to using a wet blade to provide the closest trim.
• Note: This attachment provides a dual purpose solution for stubble or close results
without irritation.
• Attach the comb to the detail trimmer making sure to keep the adjustable guard
orientated to the large cutting teeth, while covering the small cutting teeth.
• Once guard is in place, you can adjust the height of cut by using the thumb adjustment
button on the comb.
USING THE MINI FOIL SHAVER
• Hold the groomer so the mini foil shaver gently touches your face.
• Use short, well-controlled movements to shave around your beard/moustache. Use
your free hand to stretch your skin. This encourages the hair to stand upright making it
easier to shave.
• Note: The mini foil shaver was designed to shave the detail areas around your beard/
moustache/sideburns. It was not designed to shave your entire face. For a close
comfortable shave, guaranteed, use one of Remington’s electric shavers.
CARE FOR YOUR GROOMER
• Care for your product to ensure a long lasting performance. We recommend that you
clean your groomer after each use.
• The easiest and the most hygienic way to clean the groomer is by rinsing the product
head after use with warm water.
AFTER EACH USE
• Rinse the accumulated hair from the cutters and shake o excess water, alternatively,
use a small soft brush.
• Gently tap on a at surface to remove hair particles, and brush the remaining hairs
away.
• Place one or two drops of cutter oil or sewing machine oil on the blades.
• Turn the clipper on to distribute the oil evenly, wipe o any excess oil.
• Wipe the main unit with a damp cloth and dry immediately.
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the
battery.
• Unplug groomer from the outlet to avoid risk of electrical shock.
• Pry the upper housing from the product with a at head screwdriver. This will
expose the batteries.
ENGLISH