REMINGTON®
POWERHAMMER
Model 476
Operating
Instructions
The Remington POWERHAMMER is
designed for use with Remington 22
caliber, Type A crimped power loads and
Remington Power Fasteners which are
no longer than 68mm (2 11/16").
Remington Power Fasteners are manu-
factured from special steel and heat
treated to produce a very hard, yet duc-
tile, fastener.
CAUTION:
Read this manual and all labels carefully
before operating your powder actuated
tool. This manual should always accom-
pany the tool and be transferred with it
upon change of ownership.
WARNING ICON G 001
WARNING: This tool is de-
signed only for use by qualified opera-
tors. Qualification is obtained through a
thorough understanding of the
Safety
Warnings
and operating instructions as
defined in this operating manual.
To Next Page
General