Comb Settings
• The hair clipper comes with two adjustable combs, a short length
adjustable comb (indicated by 1-21mm on the back of the comb) and a
longer length adjustable comb (indicated by 24-44mm on the back of
the comb).
Shorter Length Adjustable Comb Longer Length Adjustable Comb
1mm 24mm
3mm 26mm
6mm 29mm
9mm 32mm
12mm 35mm
15mm 38mm
18mm 41mm
21mm 44mm
Step 1 – Nape of the neck
• Set the comb to 3mm or 6mm.
• Hold the clipper with the blade teeth pointing upwards. Start at the
centre of the head at the base of the neck.
• Slowly lift the clipper, working upwards and outwards through the hair,
trimming just a little at a time.
Step 2 – Back of the head
• With the comb set at 12mm or 18mm, cut the hair at the back of the
head.
Step 3 – Side of the head
• With the comb set at 3mm or 6mm, trim sideburns. Then change to
the longer 9mm guide comb and continue to cut the top of the head.
Step 4 – Top of the head
• Use the longer length comb attachment and set it to 24mm or 27mm
then cut hair on top of the head against the direction in which the hair
normally grows.
• For longer hair on top, use the longer length comb attachment (24 –
44mm) to achieve the desired style.
• Always work from the back of the head.
To Next Page
Loading...
