4
• Do not allow any part of the appliance touch the face, neck or scalp.
• Keep the power plug and cord away from heated surfaces.
• Do not use attachments other than those we supply.
• Do not use the appliance if it is damaged or malfunctions.
• Do not twist or kink the cable, or wrap it round the appliance. Check the cord regularly for any sign
damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Advanced ceramic ultra coated plates
2. On/o switch
3. Temperature controls
4. Temperature display
5. Heat boost function
6. Temperature lock function
7. Hinge lock
8. Heat resistant pouch
9. Swivel cord
ADDITIONAL FEATURES
• Fast heat up—ready to use in 15 seconds.
• Automatic safety shut o – this unit will switch itself o if no button is pressed or it is left on after 60
minutes.
• Multivoltage: for home or abroad. At 120V times and temperatures may vary.
INSTRUCTIONS FOR USE
• Before use, ensure the hair is clean, dry and tangle-free.
• For extra protection use a heat protection spray.
• Hairsprays contain ammable material - do not use while using this product.
• Section the hair prior to styling. Style the lower layers rst.
1. Plug the product into the mains power supply. Press and hold the on button to switch on.
2. When the styler is plugged in but not turned on, ‘OFF’ will show in the display
window indicating the styler is in standby mode.
3. Start styling on lower temperatures rst. Select appropriate temperature for your hair type using the
controls on the side of the product.
4. To adjust the temperature use the +/- temperature controls on the side of the
product. ‘+’ increases the temperature ‘-‘ decreases the temperature.
Recommended Temperatures:-
Temperature Hair type
150°C - 170°C Thin/ Fine, damaged or bleached hair
170°C - 200°C Normal, healthy hair
200°C - 230°C Thick, very curly and dicult to style hair
• Caution: The hottest temperatures should only be used by experienced stylers.
5. The digital display will stop ashing when the product is ready to use.
ENGLISH