Remington ProPower HC7170 - Getting Started; Digital Display

4
PARTS
1. On/O/Turbo Switch
2. Blade set
3. 2 attachment guide combs 1-21mm and
24-44mm (not shown)
4. Blade release button
5. Digital display
6. Micro USB port
7. Adaptor (not shown)
8. Slide select adjustable comb switch
GETTING STARTED
CHARGING YOUR APPLIANCE
• Before using your hairclipper for the rst time, charge for 4 hours.
• Ensure the product is switched o.
• Connect the charging adaptor to the product and then to the mains.
• If the product is not going to be used for an extended period of time (2 – 3 months),
unplug it from the mains and store.
• Fully recharge your hairclipper when you would like to use it again.
• Allow 4 hours for a complete charge.
DIGITAL DISPLAY
• The device features a digital fuel gauge to show remaining charge and charging status:
During charging:
When the unit is plugged in, the corded indicator icon will
show ( ). With the device turned o and connected to the
charger, the display will light up in a rotating pattern during
charging.
Once charged the display will show 90 and the corded
indicator icon ( ).
During corded use:
When the unit is plugged in, the corded indicator icon will
show ( ). Normal operating speed:
ENGLISH