4
ENGLISH
CHARGING YOUR APPLIANCE
1. Ensure the product is switched off.
2. Connect the product to the USB cable and then connect the USB end of the cable to a
powered USB port.
3. Charge for 2 hours when using for the first time. This first charge is important to the
shaver’s battery life.
CHARGING INDICATOR LIGHTS
During charging
Lights Charge level
0-25%
25-50%
50-75%
75-99%
= on = flashing
Once fully charged, all 4 lights will stay on for 5 minutes and then go off.
Charge remaining
After use, when you switch off your shaver, the charging indicator lights show the remaining
charge for 5 seconds.
Lights Charge remaining
99-75%
75-50%
25-50%
25% or less
During use
The lights will illuminate backwards and forwards during use in a cycling pattern.
• Your head shaver cannot be used when it is charging.
• When empty, the battery should be charged for 2 hours for a full charge and will
provide up to 60 minutes of shaving time.
• To preserve the life of the battery do not charge the battery after each use. The best
practice is to use the shaver until there is only a single light left flashing and then
recharge.
To Next Page
Loading...
