9
CLEANING, CARE & MAINTENANCE
Cleaning the Epilator Head and Attachment Caps
Note: Do not submerge the epilator body under water
To ensure long lasting performance of your epilator it is important to clean
the head assembly and attachment regularly. Always
keep the cap on the epilation head when it is not in
use to prevent damage to the barrel.
• Ensure that the epilator is turned off and
disconnected from the mains.
• Pull the cap attachment away from the body of
the epilator.
(Diagram E)
• Using the cleaning brush provided brush the accumulated hair from
the tweezers by slowly turning the barrel. Alternatively, remove the
attachment cap from body of the epilator and rinse the cap and barrel
under running water.
• Allow to dry completely before reattaching the cap.
• Replace the cap attachment back onto the body of the epilator.
Note: The body of the epilator is NOT washable or suitable for cleaning
under water.
Lubricating the Head After Contact With Water
Once a month Remington
®
recommends that after rinsing the epilation
barrel with water, that a light-grade oil (such as sewing machine oil) be
used to libricate the tweezers. Simply spread 1-2 drops lightly over the
epilator barrel with your fingertip and wipe away all excess oil.
DO NOT use hair oil, grease or any oil mixed with kerosene or solvent as
these will evaporate.
To Next Page
Loading...
