EasyManua.ls Logo

Remington T Series - Charging Your Appliance; Charging Indicator Lights

Remington T Series
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
PARTS
1. Precision T-blade
2. On/O/Turbo switch
3. Travel lock
4. Charging indicator lights
5. Charger connector
6. Adjustable stubble comb (1.5 - 5mm)
7. Foil release buttons
8. Foil shaver attachment
9. Release button
10. Fixed guide combs (1.5 - 25 mm)
Not shown:
Adaptor
Cleaning brush
Oil bottle
Storage pouch
CHARGING YOUR APPLIANCE
This appliance can be used ‘cordless’ by powering it from its internal rechargeable
battery, or ‘corded’ by connecting it to the charging adaptor and then the mains power
supply. Powering the appliance from the charging adaptor is useful if the rechargeable
battery does not have enough charge. Be aware however, that frequent use of the
cordless mode will reduce the life of the rechargeable battery.
Before using your trimmer for the rst time, charge for 4 hours.
1. Ensure the product is switched o.
2. Connect the charging adaptor to the product and then to the mains.
3. Ensure that the travel lock switch is in the unlocked position ( U).
4. The charging lights will light up in sequence during charging and remain on when
fully charged as long as the charging adaper is plugged in.
CHARGE REMAINING INDICATOR LIGHTS
Light colour
Charge Level Remaining
100% 70% 40% 10%
5 minute run
time
Blue
Red
On O Flashing
Your trimmer cannot be overcharged. However, if it is not going to be used for an
extended period of time (2-3 months), unplug it from the mains and store.

Related product manuals