7
SWITCHING YOUR TRIMMER ON AND OFF
WAKING UP
Providing the travel lock has not been set to the locked position, your trimmer will wake
automatically when you pick it up:
• The display will come on.
• The buttons will light up.
• The comb will move to the last selected length setting.
Note: Your trimmer will go into energy saving mode if it has not been used for several days.
Use the on/o button to reactivate it.
STOPPING AND STARTING YOUR TRIMMER
To start your trimmer, press the on/o button.
To stop your trimmer, press the on/o button again.
HIBERNATE
To place your trimmer into hibernate mode, press and hold the on/o button.
• The display will go out.
• The buttons will go out.
• The comb will fully retract.
For 20 seconds, your trimmer will not respond to touch signals. However, you can activate
your trimmer during this time by pressing the on/o button. After 20 seconds, picking up
your trimmer will wake it up again.
AUTO OFF
If left unattended your trimmer will auto shut down after a period of time. Your trimmer will
wake up automatically when picked up.
TRAVEL LOCK
To prevent your trimmer accidentally switching on during travel, storage, etc. slide the travel
lock switch to the lock
L
position. This will deactivate the touch control features of your
trimmer. To reactivate, slide the lock to the unlocked
U
position. The travel lock can also be
set to the lock position to switch your trimmer o.
INSTRUCTIONS FOR USE
During use, your trimmer will automatically adapt its speed and cutting rate according to
the hair thickness being cut.
TRIMMING YOUR BEARD
For even cutting, allow your trimmer to cut its way through the beard hair. Do not force it
through quickly. If you are cutting for the rst time, start with the maximum comb length
setting.
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
To Next Page
Loading...
