8
THINNING OR TAPERING THE BEARD OR MOUSTACHE
1. Set the adjustable comb to the desired length.
2. Place the at part of the comb against the skin. Slowly slide the comb through the hair.
3. Repeat from dierent directions as necessary.
4. If hair builds up in the trimmer comb during the trimming process, switch the unit o,
remove the comb and brush o the hair.
TRIMMING YOUR SIDEBURNS
1. Hold your trimmer with blade facing you.
2. Start with edge of sideburn, and with the trimmer blades resting lightly against your
skin, use motions towards edge of sideburn line to trim the desired locations in facial
area.
3. Shape as desired.
TRIMMING THE NAPE OF YOUR NECK
1. Remove the adjustable comb.
2. Use your ngers to lift the hair at the base of your head up o the neck. Your index
nger should be covering the roots of the hairs you are lifting to prevent accidental
removal by trimmer.
3. Using your other hand, hold the trimmer to the base of your neck with the cutting unit
facing up, and move the trimmer up the length of the neck until it touches your nger
covering the hair roots at the base of your head.
4. Be sure to move the unit slowly when performing this operation and to keep the hair
roots at the base of your head out of the way of the trimmer.
TIPS FOR BEST RESULTS
• Your beard, moustache or sideburn hair should be dry.
• Avoid applying lotions before use.
• If you are triming for the rst time, start with the adjustable comb set to its maximum
length position.
CARING FOR YOUR TRIMMER
Never rinse, wash or otherwise subject this product to liquid whilst the charger is
connected.
1. For best results, keep trimmer running while rinsing it under the tap.
2. For more thorough cleaning the blades can be easily removed to wash any hair
trimmings from the blades.
3. Push the top of the blade away from the trimmer body using your thumb.
4. Wash, then ret the blade.
5. Place a few drops of cutter or sewing machine oil onto the blades. Wipe o excess oil.
ENGLISH
To Next Page
Loading...
