Remington WSF5060 - Getting Started and Setup; Getting Started; Inserting Batteries; Instructions for Use

4
GETTING STARTED
Be patient when rst using your lady shaver, as with any new product, it may take a little
while to familiarise yourself with the product. Take the time to acquaint yourself with your
shaver, as we are condent you will receive years of enjoyable use and complete
satisfaction.
INSERTING BATTERIES
• Your shaver requires ‘AAA’ alkaline batteries (rst set included).
• Make sure the product is turned o.
• Rotate the battery compartment cap approximately ¼ turn anti-clockwise then pull o.
• Insert ’AAA’ alkaline batteries, so that the (+) and (-) marks on the battery face the same
mark in the battery compartment.
• Place cap back on unit using the alignment marks and rotate clockwise until the cap
snaps into place
• NOTE: Your shaver will not work if the batteries are inserted incorrectly
• NOTE: Remove the batteries if the unit is not in use for long periods.
INSTRUCTIONS FOR USE
Your lady shaver is suitable for legs, underarms and the bikini area. It can be used dry or in
the shower.
FOR REGULAR SHAVING
• Switch the shaver on.
• Hold the shaver at a right angle to your skin and move the shaver against the direction
of the hair growth.
• After shaving, turn the shaver o.
• NOTE: Before dry shaving, ensure the area is clean, dry and free from creams or oils.
TRIMMING AND SHAPING
• Attach the bikini trimmer attachment.
• Hold the shaver at a right angle to your skin and press down gently.
• Edge and shape the areas as desired.
FOR BEST SHAVING PERFORMANCE
• We recommend that you use your new shaver daily for -3 weeks to allow time to nd the
optimum shaving methods for your particular type of hair growth patterns.
CAUTION
• If your skin is easily irritated by shaving or you suer from skin allergies,you should test
a section of your arm or leg before using the shaver.