5
XR1790AU SPECIFICATIONS
Power System Cordless
Full Charge Time 90 Minutes
Cordless Shave Time 60 Minutes
Quick Charge Yes (5 Minutes)
LED Display 5 shave-learn LEDs
Voltage Type USB
Waterproof Yes
Replacement Head & Cutters SPR-X9-BA
CHARGING
• It is recommended to fully charge your appliance before using it for
the first time.
• Ensure the product is switched off.
• Connect the product to the USB cable and then connect the USB end
of the cable to a powered USB port.
SHAVE-LEARN LEDS
Number of shaves remaining
During use, your shaver continuously analyses the average time it takes you
to shave.
The LEDs are all lit when the battery has enough charge for 5 shaves or
more. When it senses that there are only 5 shaves remaining before the
battery needs to be recharged, the LEDs will show each remaining shave
left when you turn on your shaver. All 5 LEDs means you have 5 or more
shaves left, 4 LEDs, 4 shaves, etc. The LEDs will fade out after 5 seconds.
CHARGING
During charging, the 5 LEDs act as a fuel gauge with each LED representing
20% of the battery charged. When your shaver is fully charged, all of the
LEDs will switch off.
• Run time from fully charged is up to 60 mins.
• Charge time from empty is 90 minutes.
• Do not recharge your product after each use as this will shorten the
life of the battery.
To Next Page
Loading...
