Remixd ETRTWB User Manual

TRULY WIRELESS EARBUDS
USB to Micro USB
Charging Cable
Pairing Quick Start Guide
Your truly wireless earbuds come pre-paired
together and should pair to your phone like any
other Bluetooth device once both earbuds are
powered on. It is suggested you hold the earbuds
close to your ears to hear the voice prompts.
1. Remove both earbuds from the case and hold
down the power buttons for 3 seconds until you
hear them say “Power On”
2. The earbuds should conrm they are paired
together by playing “Left Channel” from the left
bud and “Right Channel” from the right bud
3. Once these prompts play open your Bluetooth
settings on your device and pair the “remixd Truly
Wireless” device
4. If you are having issues please see the full user
guide for troubleshooting.
Button functions
1. Pause/play: single press on either bud
2. Track forward: double press on host bud
3. Answer/end call: one press on host bud
4. Reject call: press and hold for 3-5 seconds on
host bud
5. Power On/O: press and hold for 3 seconds

Remixd ETRTWB Specifications

General

Brand	Remixd
Model	ETRTWB
Category	Headphone
Language	English

Summary

Pairing Your Truly Wireless Earbuds

Initial Pairing Steps

Instructions for removing earbuds from case, holding power buttons, and confirming pairing prompts for initial connection.

Connecting to Device

Steps to open Bluetooth settings on your device and pair the 'remixd Truly Wireless' device after prompts play.

Troubleshooting Connection Issues

Guidance to consult the full user guide for any issues encountered during the pairing process.

Understanding Button Functions

Pause/Play Functionality

Single press on either earbud controls playback (pause or play).

Track Forward Function

Double press on the host earbud to advance to the next track.

Call Management

Single press on the host bud to answer or end a call.

Rejecting Incoming Calls

Press and hold the host earbud for 3-5 seconds to reject an incoming call.

Power On/Off Operation

Press and hold either earbud for 3 seconds to power the device on or off.